Track Saw Models
Kreg Ionic Drive Track Saw: 200B vs 100A Guide
Kreg’s legacy 100A product URLs now resolve to a second-generation cordless plunge-cut track saw identified on the live manufacturer pages as KPTPS200B tool-only and KPTBPS200B kit. Retained Amazon records still use KPTPS100A, so match the identifier, track generation and package contents instead of assuming the names describe one unchanged offer.
As an Amazon Associate I earn from qualifying purchases. How affiliate links work.
Inspect the relevant offer
Kreg Ionic Drive Adaptive Cutting System Saw + Guide Track Kit, ACS2100B
Check Amazon offerKreg Ionic Drive Track Saw: documented specifications
| Documented specification | Kreg Ionic Drive Track Saw |
|---|---|
| Power | cordless |
| Blade diameter (mm) | 165.10 |
| Arbor (mm) | Not confirmed |
| 90° depth on rail (mm) | Not confirmed |
| 45° depth on rail (mm) | Not confirmed |
| Rail system | Kreg ACS 62-inch guide |
| Battery platform | Kreg 20V Blue Ion |
| Matched Amazon offer | Check Amazon offer |
- Kreg’s legacy KPTPS100A and KPTBPS100A URLs now render current KPTPS200B and KPTBPS200B identifiers. Retained 100A marketplace records and ACS2100B stay distinct; connector and package generation must be checked. BCS63422 not verified.
The model numbers that identify the purchase
Kreg’s current pages identify KPTPS200B as the cordless tool-only saw and KPTBPS200B as the battery-and-charger kit, even though the incoming URLs and retained marketplace record still contain KPTPS100A or KPTBPS100A. The current compatibility list also names Universal Track sections ACSCT62, ACSCT55 and ACSCT26 plus second-generation connectors. Treat the 100A and 200B labels as a generation check, not interchangeable spelling, and verify the exact included battery, charger, track and connector set.
Cordless ACS is a workflow choice
If your panels are cut in several locations, taking the same guide system with a battery-powered saw may simplify setup. Think about where the dust extractor will remain, however: an extraction hose still connects the tool to another piece of equipment. A cordless saw is most useful when removing its power lead resolves a real restriction. If the entire cutting station stays next to an outlet, compare the corded ACS option on total cost and handling rather than assuming newer power technology is automatically better for your shop.
The blade and battery are part of the design
The Ionic Drive page lists a 6-1/2-inch, 40-tooth blade with a 1.6 mm kerf and a six-speed brushless motor. Kreg identifies the battery system as Blue Ion, not a generic interchangeable 20V connection. Plan any spare pack within that named platform. The blade specification also deserves attention when ordering a replacement; do not substitute a thicker blade merely because its outside diameter matches. Follow the machine instructions for plate, kerf, arbor and riving-knife compatibility as a group.
Use the ACS rail relationship deliberately
Kreg’s current page says the saw is designed for its Universal Track and names ACSCT62, ACSCT55 and ACSCT26 sections with second-generation connectors. That does not prove every older ACS connector or trimmed strip transfers unchanged. An existing owner should identify the track and connector generation, inspect the strip and validate the actual saw-and-track combination on scrap before a finish cut.
Safety features require the right behavior
Kreg lists a shrouded retracting blade, riving knife, electronic brake and anti-kickback control. Those features are reasons to read the model-specific sequence, especially if you are moving from another saw. Do not assume the controls work like a conventional circular saw or that a brake permits immediate lifting while the blade is still moving. Remove the battery for blade changes and adjustments as directed. Treat any binding or unexpected movement as a reason to stop and correct the setup before resuming.
Who benefits from the complete rail bundle
The ACS2100B package is most straightforward for someone beginning with no matching saw, battery or guide. An existing Kreg owner may need fewer parts, while someone already committed to another rail system should price the extra accessories. Make a list of near-term projects and identify whether table integration, mobile panel breakdown or repeated cabinet parts is the main goal. Select the package around that priority. This specification-based assessment does not claim tested runtime, superior cut finish or a guaranteed return from a more expensive kit.
Questions about Kreg Ionic Drive Track Saw: 200B vs 100A Guide
Does Kreg really make a cordless track saw?
Yes. The live Kreg pages now identify KPTPS200B tool-only and KPTBPS200B kit versions; retained marketplace listings may still show the earlier 100A identifiers.
Can it use any 20V battery?
No such universal compatibility is established. Kreg identifies Blue Ion batteries for this system; use the approved packs and charger.
Does the battery kit include the guide rail?
The current KPTBPS200B page lists the saw, battery and charger but not a track. Confirm whether a seller is offering the older 100A listing, the current 200B kit or a separate saw-and-track bundle.
