Track Saw Models
Festool TS 55 FEQ: Corded Track Saw Buying Guide
The Festool TS 55 FEQ is worth considering as part of a repeatable cabinet-panel workflow. Its case rests on the complete saw, guide and extraction arrangement you intend to use. Paying for a premium brand does not remove setup work, and this guide does not claim independent accuracy testing. Start by deciding which cuts must be finished at the rail and which will receive a later machining operation.
As an Amazon Associate I earn from qualifying purchases. How affiliate links work.
Inspect the relevant offer
Festool 576708 Plunge-Cut Circular Track Saw TS 55 FEQ-F-Plus
Check Amazon offerPackage checklist: what is actually included
As an Amazon Associate I earn from qualifying purchases. How affiliate links work.
| Exact package | Manufacturer-listed contents | Guide rail | Still needed before the first cut | Choose it when | Retained offer |
|---|---|---|---|---|---|
| TS 55 FEQ-F-Plus (576708) | Corded saw, 160 x 1.8 x 20mm WD42 blade, splinterguard, sight window, hex key, power cord and Systainer | No guide rail is listed in the Plus package contents | FS rail, stable support and extraction connection | A corded 160mm panel station covers the recurring work | Check Amazon offer |
| Retailer 55-inch rail bundle | TS 55 saw package plus the exact rail named by the retained verified offer | 55-inch rail listed by the retained offer | Support, extraction and any longer-rip guide plan | The included guide covers the first project's actual cut length | Check Amazon offer |
Festool TS 55 FEQ: documented specifications
| Documented specification | Festool TS 55 FEQ |
|---|---|
| Power | corded |
| Blade diameter (mm) | 160 |
| Arbor (mm) | 20 |
| 90° depth on rail (mm) | 51 |
| 45° depth on rail (mm) | Not confirmed |
| Rail system | Festool FS |
| Battery platform | Not confirmed |
| Matched Amazon offer | Check Amazon offer |
- US TS55FEQ manual section8.2 explicitly states maximum51mm with FS guide rail and55mm without.
- Manual imperial rounding is inconsistent with metric; retain explicit metric51mm and confirm close-limit work with manufacturer.
- 45-degree rail depth not inferred.
Identify the F generation before comparing prices
The US TS 55 FEQ-F-Plus is a corded 120V model using a 160mm blade. Festool lists a riving knife and an attachable splinter guard among its features. Those details should be tied to this generation rather than blended with older TS 55 variants or cordless TSC models.
A used listing headed simply TS55 needs closer inspection. Request the machine's complete designation and the blade information, then consult that version's documentation. A lower price is not a fair comparison if the offer describes a different generation with a different accessory or blade requirement.
Make the case with a cabinet cutting sequence
For a cabinet job, list the wide panel cuts you want to complete before assembly. Ask whether the track-saw station will deliver final dimensions or merely reduce pieces for another machine. That decision changes the value of rail squares, stops and repeat-cut accessories.
If every part needs only rough breakdown, an extensive accessory collection may be unnecessary. If repeated cabinet widths are central to the business, consistent setup and measurement deserve serious attention. Buy the pieces that support your sequence rather than collecting every accessory that appears beside a product listing.
A splinter guard is a consumable reference
Festool's attachable guard is intended to help the offcut side of the cut, while the rail has its own edge reference. Neither should be interpreted as a guarantee of a perfect face on every sheet product. Blade condition, material and the prescribed setup still matter.
Before cutting expensive veneered stock, use a representative offcut to establish the result with your actual arrangement. That is a commissioning step for your own equipment, not an endorsement based on an imaginary review test. Plan room in the project budget for samples and replacement consumables.
Read capacity through the rail arrangement
The US TS55 FEQ operating instructions distinguish a 55mm maximum without a guide from a 51mm maximum with an FS rail. We retain the explicit metric guided figure instead of copying the larger headline number. The manual also prints a non-equivalent inch fraction, so check close-limit work with Festool rather than relying on that conversion.
The straight-cut maximum is not the bevel capacity. For a thick beveled door, obtain the guided depth at the required angle before purchasing. Measure the actual workpiece and verify the correct depth-scale indication. Consider another capacity class if the real job cannot be resolved comfortably within the documented arrangement.
Spend system money in the right order
First price the selected saw package, an appropriate rail, extraction connection and a stable support surface. Then consider a longer guide or repeat-cut aid. A case and several small accessories cannot compensate for lacking the guide needed for the longest panel cut.
For a shop-based user, corded power can make the system easy to keep ready without battery management. For mobile installation, account for every outlet move and lead route. The TS 55 FEQ earns consideration when that practical arrangement fits, not because it carries a universal best-saw label.
Questions about Festool TS 55 FEQ: Corded Track Saw Buying Guide
Is the TS 55 FEQ the same as TSC 55?
No. TS 55 FEQ is corded; TSC identifies a cordless family with further generation differences. Compare the complete designation and package number.
Can I use any 160mm Festool blade?
Check the exact saw generation and full blade specification. Festool publishes a compatibility table because diameter alone does not resolve kerf and generation differences.
Does the Plus package automatically mean a rail is included?
Do not assume so. Read the exact contents and item number. Rail-containing packages must be compared against equivalent contents rather than the general Plus wording.
